This course provides guidance on the use of control points in laser scanning projects. This course follows on from the Fundamentals of aligning laser scanner setups course.
-
Equipment needed: None
-
Total time needed: Approximately 30 minutes (can be completed in stages)
This course provides guidance on capturing laser scanner data in a way which leads to successful and accurate alignment of the point cloud data from different setups.
-
Equipment needed: None
-
Total time needed: Approximately 30 minutes (can be completed in stages)
This course will introduce the Leica RTC360 3D reality capture solution. It will cover the benefits of using it, how it works and how to use it.
-
Equipment needed: None
-
Total time needed: Approximately 1 1/2 hours (can be completed in stages)
Dieser Lehrgang führt Sie in die Anwendung der Leica Soft-ware Cyclone REGISTER 360 ein. Dieser wird die Vorteile der Software und die Verwaltung von Scandaten bis hin zu einfachen Ergebnissen behandeln.
-
Benötigte Ausrüstung: Leica Zyklon REGISTER 360 (v1.5.0) und eine gültige Lizenz
-
Insgesamt benötigte Zeit: Ungefähr 6 Stunden, (ohne Herun-terladen der Kursdaten).
-
Dieser Kurs ist so konzipiert, dass er in Etappen absolviert werden kann und nicht In einem einzigen Versuch, das Ler-nen zu maximieren.
This course will teach you how to use the fundamental tools of Leica CloudWorx which are required for the efficient drawing of CAD features on top of point cloud data.
-
Equipment needed:
-
Current version of Leica CloudWorx for your own CAD software (and valid licences for both)
-
Basic ability to use your own CAD software
-
Internet connection to download the course sample data
-
Total time needed: Approximately 1 hour
This course builds on the CloudWorx for AutoCAD: Essentials course. It covers the additional tools available with the CloudWorx for AutoCAD Pro licence.
-
Requirements:
-
Current version of Leica CloudWorx for AutoCAD
-
CloudWorx for AutoCAD Pro licence
-
Ability to use AutoCAD
-
Ability to use the CloudWorx tools available with the Basic licence
-
Internet connection to download the course sample data
-
Total time needed: Approximately 4 hours
In this course you will learn about the Cyclone 3DR tools which are fundamental to the production of a wide variety of customer deliverables.
-
Equipment needed: Cyclone 3DR installed and licensed
-
Total time needed: Approximately 3-4 hours (can be completed in stages)
This is the second in the series of Leica Cyclone 3DR online learning courses - it follows on from the Leica Cyclone 3DR: Fundamentals course. In this course, you will learn the tools and processes which are most commonly used in comparison and inspection workflows.
-
Equipment needed: Cyclone 3DR installed and licensed
-
Total time needed: Approximately 3 hours (can be completed in stages)
This course is essential learning for anyone using Leica Cyclone 3DR in Building, BIM, Architecture, Engineering and Construction.
You will build on the knowledge you have already gained in the Leica Cyclone 3DR: Fundamentals course and the Leica Cyclone 3DR: 3D Analysis course. This course consists of 5 distinct lessons, each covering a different building-related task, and each taking under an hour to complete.
-
Equipment needed: Leica Cyclone 3DR installed on your PC
-
Total time needed: Approximately 4 hours